News

LAU Engineers Prepare for Professional Certification

Alumni and faculty shared what it takes to earn the SOLIDWORKS professional-level certification, and why it matters to employers, as LAU prepares to host the exam on its Byblos campus in December.

By Sara Makarem

A full house at the SOLIDWORKS certification program event.
For the LAU School of Engineering (SOE), granting degrees is only part of the mission; the school also gives students solid preparation for the careers that follow. Part of that preparation is SOLIDWORKS, Dassault Systèmes’ 3D computer-aided design (CAD) software, which engineers in fields from automotive to aerospace use to model and test parts long before they reach the factory floor. The software is a core part of the curriculum, and certification in it gives students an industry-recognized credential before they graduate.

That proof was the focus when the Beirut SOLIDWORKS User Group held a certification session on November 9 under the sponsorship of the SOE. The event was fully booked, with 120 registrations from students and alumni preparing for the professional-level certification exam that LAU, an authorized certification center, will host in December.

The certification program is recognized by employers worldwide, many of whom rely on it as a hiring benchmark. It progresses from Certified SOLIDWORKS Associate (CSWA) to Professional (CSWP) and Expert (CSWE).

Beyond the exams, users support one another through the SOLIDWORKS User Group Network, a global network of member-run local groups funded and supported by the software’s developer. The Beirut chapter is led from LAU, where it brings students and alumni together with Lebanese industry around design skills and certification, and membership is free and open to anyone.

solidworks-2026-02.jpg

At the event, Dr. Ali Ammouri, assistant professor of practice, director of the LAU Industrial Hub, and leader of the user group, moderated the session and spoke alongside the guests. A Certified SOLIDWORKS Expert himself, he sees the group as a way for LAU to anchor Lebanon’s SOLIDWORKS community, linking the SOE and the Industrial Hub with industry.“Certification turns what students learn in class into proof that employers recognize anywhere in the world,” he said. “Through the user group, LAU becomes the home of Lebanon’s SOLIDWORKS community, a place where students, alumni and industry learn from each other.”

The rest of the program was delivered by LAU’s own alumni and students, speaking to an audience in which many had already taken the first step, since about 400+ LAU students and alumni hold the CSWA.

solidworks-2026-03.jpg

Mohammad Basharoush (BE ’24), an LAU instructor with several CSWP certifications, explained what the next level adds. “The professional certification is very limited here in Lebanon. It has around 100 users certified at this level,” Basharoush said. “Obtaining it is going to set you apart and show your employers that you can design parts with intent, then keep iterating on them until you reach the final version.”

solidworks-2026-04.jpg

Where Basharoush focused on the Lebanese market, Noeman El Hassanieh (BE ’23), the first CSWE in Lebanon and now a test consultant at Murex, took a wider view. He described how the software’s parametric modeling and built-in simulations, including stress analysis, shorten the path from idea to product. In his view, certification gives students “an industry-recognized proof of their skill set.” He added, “Employers look for the ability to build manufacturing-ready models, to troubleshoot, and to analyze complex parts and assemblies.”

solidworks-2026-06.jpg

That employer’s perspective is one Hasan Ismail (BE ’24) knows well. A CSWP holder and project engineer at Elum Energy, he also co-founded a robotics consultancy with Basharoush, and he returned to campus because he has seen both sides.

“SOLIDWORKS certifications prove that you are capable of working within recognized standards and best practices, not only that you can use the software,” he said. “University teaches you theory, while industry expects you to deliver to a standard from day one. If you can help even a few students close that gap, the visit is worthwhile.”

solidworks-2026-05.jpg

Alex Obeid, a mechanical engineering student who holds the CSWA and is preparing for the CSWP, showed how he uses SOLIDWORKS macros and its programming interface to automate repetitive design work, a skill he developed as an intern at the LAU Industrial Hub.

Alongside the talks, participants learned study techniques and watched live demonstrations of exam-style problems modeled on the CSWP format, a credential that can strengthen their profiles for internships and jobs.

With the December exam approaching, the user group plans to keep meeting, connecting LAU students and alumni with engineers across Lebanon and the wider SOLIDWORKS community as they work toward higher levels of certification.